• small
• Medium
• Large

Specification

These are Daikoku Standard Specifications,If you have special request, please contact us.

Copper wire

Copper wire(Class 2 and Class 3)

Size [mm]	Conductor dia. [mm]	Conductor resistance [Ω/m] (20℃)	Class 2				Class 3
			Overall diameter [mm]	Min film thickness [mm]		Wire length (*3) [m/1,000gs]	Overall diameter [mm]	Min film thickness [mm]		Wire length (*3) [m/1,000gs]
				Insulation	Bonding			Insulation	Bonding
0.020	- (*1)	53.8 ～ 57.4	0.0280 ～ 0.0300	0.0240 ～ 0.0260 (*2)	0.0015	309,000	0.0260 ～ 0.0280	0.0240 ～ 0.0260 (*2)	0.001	320,000
0.025	- (*1)	34.2 ～ 36.8	0.0335 ～ 0.0365	0.0285 ～ 0.0315 (*2)	0.0015	202,000	0.0310 ～ 0.0340	0.0290 ～ 0.0310 (*2)	0.001	210,000
0.030	0.030 ± 0.001	22.8 ～ 26.1	0.039 ～ 0.043	0.002	0.002	142,000	0.037 ～ 0.040	0.002	0.001	145,000
0.035	0.035 ± 0.001	16.9 ～ 19.0	0.044 ～ 0.048	0.002	0.002	106,000	0.042 ～ 0.045	0.002	0.001	108,000
0.040	0.040 ± 0.001	13.0 ～ 14.5	0.050 ～ 0.055	0.002	0.002	81,000	0.048 ～ 0.052	0.002	0.001	82,000
0.045	0.045 ± 0.001	10.3 ～ 11.4	0.055 ～ 0.060	0.002	0.002	65,000	0.0053 ～ 0.057	0.002	0.001	66,000
0.050	0.050 ± 0.002	8.11 ～ 9.53	0.061 ～ 0.067	0.003	0.003	52,000	0.060 ～ 0.064	0.003	0.0015	53,000
0.055	0.055 ± 0.002	6.75 ～ 7.83	0.066 ～ 0.073	0.003	0.003	44,000	0.065 ～ 0.069	0.003	0.0015	45,000
0.060	0.060 ± 0.002	5.71 ～ 6.53	0.071 ～ 0.078	0.003	0.003	37,000	0.070 ～ 0.075	0.003	0.0015	38,000
0.065	0.065 ± 0.002	4.89 ～ 5.54	0.077 ～ 0.084	0.003	0.003	31,000	0.075 ～ 0.080	0.003	0.0015	31,500
0.070	0.070 ± 0.002	4.23 ～ 4.75	0.082 ～ 0.090	0.003	0.003	27,000	0.080 ～ 0.085	0.003	0.0015	27,500
0.075	0.075 ± 0.002	3.70 ～ 4.13	0.088 ～ 0.096	0.003	0.003	23,500	0.085 ～ 0.090	0.003	0.002	24,000
0.080	0.080 ± 0.002	3.26 ～ 3.61	0.093 ～ 0.101	0.003	0.003	21,000	0.091 ～ 0.097	0.003	0.002	21,000
0.085	0.085 ± 0.002	2.90 ～ 3.19	0.098 ～ 0.106	0.003	0.003	18,500	0.096 ～ 0.102	0.003	0.002	18,500
0.090	0.090 ± 0.002	2.59 ～ 2.84	0.103 ～ 0.111	0.003	0.003	16,500	0.101 ～ 0.107	0.003	0.002	16,500
0.095	0.095 ± 0.002	2.33 ～ 2.54	0.109 ～ 0.117	0.003	0.003	15,000	0.106 ～ 0.112	0.003	0.002	15,000
0.100	0.100 ± 0.002	2.10 ～ 2.29	0.114 ～ 0.122	0.003	0.003	14,000	0.111 ～ 0.118	0.003	0.002	14,000

*1　Conductor diameter is controlled by conductor resistance.
*2　Film thickness of insulation is controlled by insurated diameter.
*3　Wire length calculated at target dimentions is mentioned as reference. This is not specified value.
*4　Standard mesurement pressure of micrometer is as follows.
　　Size < 0.030mm：0.7N
　　Size ≥ 0.030mm：3.0N

　

DHT wire

DHT wire(Class 2 and Class 3)

Size [mm]	Conductor dia. [mm]	Conductor resistance [Ω/m] (20℃)	Class 2				Class 3
			Overall diameter [mm]	Min film thickness [mm]		Wire length (*3) [m/1,000gs]	Overall diameter [mm]	Min film thickness [mm]		Wire length (*3) [m/1,000gs]
				Insulation	Bonding			Insulation	Bonding
0.020	- (*1)	53.8 ～ 57.4	0.0280 ～ 0.0300	0.0240 ～ 0.0260 (*2)	0.0015	309,000	0.0260 ～ 0.0280	0.0240 ～ 0.0260 (*2)	0.001	320,000
0.025	- (*1)	34.2 ～ 36.8	0.0335 ～ 0.0365	0.0285 ～ 0.0315 (*2)	0.0015	202,000	0.0310 ～ 0.0340	0.0290 ～ 0.0310 (*2)	0.001	210,000
0.030	0.030 ± 0.001	24.39 ± 5%	0.039 ～ 0.043	0.002	0.002	142,000	0.037 ～ 0.040	0.002	0.001	145,000
0.035	0.035 ± 0.001	17.92 ± 5%	0.044 ～ 0.048	0.002	0.002	106,000	0.042 ～ 0.045	0.002	0.001	108,000
0.040	0.040 ± 0.001	13.72 ± 5%	0.050 ～ 0.055	0.002	0.002	81,000	0.048 ～ 0.052	0.002	0.001	82,000
0.045	0.045 ± 0.001	10.84 ± 5%	0.055 ～ 0.060	0.002	0.002	65,000	0.0053 ～ 0.057	0.002	0.001	66,000
0.050	0.050 ± 0.002	8.78 ± 5%	0.061 ～ 0.067	0.003	0.003	52,000	0.060 ～ 0.064	0.003	0.0015	53,000
0.055	0.055 ± 0.002	7.26 ± 5%	0.066 ～ 0.073	0.003	0.003	44,000	0.065 ～ 0.069	0.003	0.0015	45,000
0.060	0.060 ± 0.002	6.10 ± 5%	0.071 ～ 0.078	0.003	0.003	37,000	0.070 ～ 0.075	0.003	0.0015	38,000
0.065	0.065 ± 0.002	5.20 ± 5%	0.077 ～ 0.084	0.003	0.003	31,000	0.075 ～ 0.080	0.003	0.0015	31,500
0.070	0.070 ± 0.002	4.48 ± 5%	0.082 ～ 0.090	0.003	0.003	27,000	0.080 ～ 0.085	0.003	0.0015	27,500
0.075	0.075 ± 0.002	3.90 ± 5%	0.088 ～ 0.096	0.003	0.003	23,500	0.085 ～ 0.090	0.003	0.002	24,000
0.080	0.080 ± 0.002	3.43 ± 5%	0.093 ～ 0.101	0.003	0.003	21,000	0.091 ～ 0.097	0.003	0.002	21,000
0.085	0.085 ± 0.002	3.04 ± 5%	0.098 ～ 0.106	0.003	0.003	18,500	0.096 ～ 0.102	0.003	0.002	18,500
0.090	0.090 ± 0.002	2.71 ± 5%	0.103 ～ 0.111	0.003	0.003	16,500	0.101 ～ 0.107	0.003	0.002	16,500
0.095	0.095 ± 0.002	2.43 ± 5%	0.109 ～ 0.117	0.003	0.003	15,000	0.106 ～ 0.112	0.003	0.002	15,000
0.100	0.100 ± 0.002	2.20 ± 5%	0.114 ～ 0.122	0.003	0.003	14,000	0.111 ～ 0.118	0.003	0.002	14,000

*1　Conductor diameter is controlled by conductor resistance.
*2　Film thickness of insulation is controlled by insurated diameter.
*3　Wire length calculated at target dimentions is mentioned as reference. This is not specified value.
*4　Standard mesurement pressure of micrometer is as follows.
　　Size < 0.030mm：0.7N
　　Size ≥ 0.030mm：3.0N

　

GDHT wire

GDHT wire(Class 2 and Class 3)

Size [mm]	Conductor dia. [mm]	Conductor resistance [Ω/m] (20℃)	Class 2				Class 3
			Overall diameter [mm]	Min film thickness [mm]		Wire length (*3) [m/1,000gs]	Overall diameter [mm]	Min film thickness [mm]		Wire length (*3) [m/1,000gs]
				Insulation	Bonding			Insulation	Bonding
0.020	- (*1)	57.77 ± 4%	0.0280 ～ 0.0300	0.0240 ～ 0.0260 (*2)	0.0015	309,000	0.0260 ～ 0.0280	0.0240 ～ 0.0260 (*2)	0.001	320,000
0.025	- (*1)	36.97 ± 4%	0.0335 ～ 0.0365	0.0285 ～ 0.0315 (*2)	0.0015	202,000	0.0310 ～ 0.0340	0.0290 ～ 0.0310 (*2)	0.001	210,000
0.030	0.030 ± 0.001	25.67 ± 4%	0.039 ～ 0.043	0.002	0.002	142,000	0.037 ～ 0.040	0.002	0.001	145,000
0.035	0.035 ± 0.001	18.86 ± 4%	0.044 ～ 0.048	0.002	0.002	106,000	0.042 ～ 0.045	0.002	0.001	108,000
0.040	0.040 ± 0.001	14.37 ± 4%	0.050 ～ 0.055	0.002	0.002	81,000	0.048 ～ 0.052	0.002	0.001	82,000
0.045	0.045 ± 0.001	11.35 ± 4%	0.055 ～ 0.060	0.002	0.002	65,000	0.0053 ～ 0.057	0.002	0.001	66,000
0.050	0.050 ± 0.002	9.19 ± 4%	0.061 ～ 0.067	0.003	0.003	52,000	0.060 ～ 0.064	0.003	0.0015	53,000
0.055	0.055 ± 0.002	7.60 ± 4%	0.066 ～ 0.073	0.003	0.003	44,000	0.065 ～ 0.069	0.003	0.0015	45,000
0.060	0.060 ± 0.002	6.39 ± 4%	0.071 ～ 0.078	0.003	0.003	37,000	0.070 ～ 0.075	0.003	0.0015	38,000
0.065	0.065 ± 0.002	5.44 ± 4%	0.077 ～ 0.084	0.003	0.003	31,000	0.075 ～ 0.080	0.003	0.0015	31,500
0.070	0.070 ± 0.002	4.69 ± 4%	0.082 ～ 0.090	0.003	0.003	27,000	0.080 ～ 0.085	0.003	0.0015	27,500
0.075	0.075 ± 0.002	4.09 ± 4%	0.088 ～ 0.096	0.003	0.003	23,500	0.085 ～ 0.090	0.003	0.002	24,000
0.080	0.080 ± 0.002	3.59 ± 4%	0.093 ～ 0.101	0.003	0.003	21,000	0.091 ～ 0.097	0.003	0.002	21,000
0.085	0.085 ± 0.002	3.18 ± 4%	0.098 ～ 0.106	0.003	0.003	18,500	0.096 ～ 0.102	0.003	0.002	18,500
0.090	0.090 ± 0.002	2.82 ± 4%	0.103 ～ 0.111	0.003	0.003	16,500	0.101 ～ 0.107	0.003	0.002	16,500
0.095	0.095 ± 0.002	2.53 ± 4%	0.109 ～ 0.117	0.003	0.003	15,000	0.106 ～ 0.112	0.003	0.002	15,000
0.100	0.100 ± 0.002	2.29 ± 4%	0.114 ～ 0.122	0.003	0.003	14,000	0.111 ～ 0.118	0.003	0.002	14,000

*1　Conductor diameter is controlled by conductor resistance.
*2　Film thickness of insulation is controlled by insurated diameter.
*3　Wire length calculated at target dimentions is mentioned as reference. This is not specified value.
*4　Standard mesurement pressure of micrometer is as follows.
　　Size < 0.030mm：0.7N
　　Size ≥ 0.030mm：3.0N

　

SDHT wire

SDHT wire(Class 2 and Class 3)

Size [mm]	Conductor dia. [mm]	Conductor resistance [Ω/m] (20℃)	Class 2				Class 3
			Overall diameter [mm]	Min film thickness [mm]		Wire length (*3) [m/1,000gs]	Overall diameter [mm]	Min film thickness [mm]		Wire length (*3) [m/1,000gs]
				Insulation	Bonding			Insulation	Bonding
0.020	- (*1)	60.31 ± 5%	0.0280 ～ 0.0300	0.0240 ～ 0.0260 (*2)	0.0015	309,000	0.0260 ～ 0.0280	0.0240 ～ 0.0260 (*2)	0.001	320,000
0.025	- (*1)	36.80 ± 5%	0.0335 ～ 0.0365	0.0285 ～ 0.0315 (*2)	0.0015	202,000	0.0310 ～ 0.0340	0.0290 ～ 0.0310 (*2)	0.001	210,000
0.030	0.030 ± 0.001	26.80 ± 7%	0.039 ～ 0.043	0.002	0.002	142,000	0.037 ～ 0.040	0.002	0.001	145,000
0.035	0.035 ± 0.001	19.69 ± 7%	0.044 ～ 0.048	0.002	0.002	106,000	0.042 ～ 0.045	0.002	0.001	108,000
0.040	0.040 ± 0.001	15.08 ± 7%	0.050 ～ 0.055	0.002	0.002	81,000	0.048 ～ 0.052	0.002	0.001	82,000
0.045	0.045 ± 0.001	11.91 ± 7%	0.055 ～ 0.060	0.002	0.002	65,000	0.0053 ～ 0.057	0.002	0.001	66,000
0.050	0.050 ± 0.002	9.65 ± 7%	0.061 ～ 0.067	0.003	0.003	52,000	0.060 ～ 0.064	0.003	0.0015	53,000
0.055	0.055 ± 0.002	7.97 ± 7%	0.066 ～ 0.073	0.003	0.003	44,000	0.065 ～ 0.069	0.003	0.0015	45,000
0.060	0.060 ± 0.002	6.70 ± 7%	0.071 ～ 0.078	0.003	0.003	37,000	0.070 ～ 0.075	0.003	0.0015	38,000
0.065	0.065 ± 0.002	5.71 ± 7%	0.077 ～ 0.084	0.003	0.003	31,000	0.075 ～ 0.080	0.003	0.0015	31,500
0.070	0.070 ± 0.002	4.92 ± 7%	0.082 ～ 0.090	0.003	0.003	27,000	0.080 ～ 0.085	0.003	0.0015	27,500
0.075	0.075 ± 0.002	4.29 ± 7%	0.088 ～ 0.096	0.003	0.003	23,500	0.085 ～ 0.090	0.003	0.002	24,000
0.080	0.080 ± 0.002	3.77 ± 7%	0.093 ～ 0.101	0.003	0.003	21,000	0.091 ～ 0.097	0.003	0.002	21,000
0.085	0.085 ± 0.002	3.34 ± 5%	0.098 ～ 0.106	0.003	0.003	18,500	0.096 ～ 0.102	0.003	0.002	18,500
0.090	0.090 ± 0.002	2.98 ± 5%	0.103 ～ 0.111	0.003	0.003	16,500	0.101 ～ 0.107	0.003	0.002	16,500
0.095	0.095 ± 0.002	2.67 ± 5%	0.109 ～ 0.117	0.003	0.003	15,000	0.106 ～ 0.112	0.003	0.002	15,000
0.100	0.100 ± 0.002	2.41 ± 5%	0.114 ～ 0.122	0.003	0.003	14,000	0.111 ～ 0.118	0.003	0.002	14,000

*1　Conductor diameter is controlled by conductor resistance.
*2　Film thickness of insulation is controlled by insurated diameter.
*3　Wire length calculated at target dimentions is mentioned as reference. This is not specified value.
*4　Standard mesurement pressure of micrometer is as follows.
　　Size < 0.030mm：0.7N
　　Size ≥ 0.030mm：3.0N

　

VDHT wire

VDHT wire(Class 2 and Class 3)

Size [mm]	Conductor dia. [mm]	Conductor resistance [Ω/m] (20℃)	Class 2				Class 3
			Overall diameter [mm]	Min film thickness [mm]		Wire length (*3) [m/1,000gs]	Overall diameter [mm]	Min film thickness [mm]		Wire length (*3) [m/1,000gs]
				Insulation	Bonding			Insulation	Bonding
0.030	0.030 ± 0.001	28.04 ± 4%	0.039 ～ 0.043	0.002	0.002	142,000	0.037 ～ 0.040	0.002	0.001	145,000
0.035	0.035 ± 0.001	20.60 ± 4%	0.044 ～ 0.048	0.002	0.002	106,000	0.042 ～ 0.045	0.002	0.001	108,000
0.040	0.040 ± 0.001	15.68 ± 4%	0.050 ～ 0.055	0.002	0.002	81,000	0.048 ～ 0.052	0.002	0.001	82,000
0.045	0.045 ± 0.001	12.39 ± 4%	0.055 ～ 0.060	0.002	0.002	65,000	0.0053 ～ 0.057	0.002	0.001	66,000
0.050	0.050 ± 0.002	10.04 ± 4%	0.061 ～ 0.067	0.003	0.003	52,000	0.060 ～ 0.064	0.003	0.0015	53,000
0.055	0.055 ± 0.002	8.29 ± 4%	0.066 ～ 0.073	0.003	0.003	44,000	0.065 ～ 0.069	0.003	0.0015	45,000
0.060	0.060 ± 0.002	6.93 ± 4%	0.071 ～ 0.078	0.003	0.003	37,000	0.070 ～ 0.075	0.003	0.0015	38,000
0.065	0.065 ± 0.002	5.90 ± 4%	0.077 ～ 0.084	0.003	0.003	31,000	0.075 ～ 0.080	0.003	0.0015	31,500
0.070	0.070 ± 0.002	5.06 ± 4%	0.082 ～ 0.090	0.003	0.003	27,000	0.080 ～ 0.085	0.003	0.0015	27,500
0.075	0.075 ± 0.002	4.41 ± 4%	0.088 ～ 0.096	0.003	0.003	23,500	0.085 ～ 0.090	0.003	0.002	24,000
0.080	0.080 ± 0.002	3.88 ± 4%	0.093 ～ 0.101	0.003	0.003	21,000	0.091 ～ 0.097	0.003	0.002	21,000
0.085	0.085 ± 0.002	3.43 ± 4%	0.098 ～ 0.106	0.003	0.003	18,500	0.096 ～ 0.102	0.003	0.002	18,500
0.090	0.090 ± 0.002	3.06 ± 4%	0.103 ～ 0.111	0.003	0.003	16,500	0.101 ～ 0.107	0.003	0.002	16,500
0.095	0.095 ± 0.002	2.75 ± 4%	0.109 ～ 0.117	0.003	0.003	15,000	0.106 ～ 0.112	0.003	0.002	15,000
0.100	0.100 ± 0.002	2.48 ± 4%	0.114 ～ 0.122	0.003	0.003	14,000	0.111 ～ 0.118	0.003	0.002	14,000

*1　Conductor diameter is controlled by conductor resistance.
*2　Film thickness of insulation is controlled by insurated diameter.
*3　Wire length calculated at target dimentions is mentioned as reference. This is not specified value.
*4　Standard mesurement pressure of micrometer is as follows.
　　Size < 0.030mm：0.7N
　　Size ≥ 0.030mm：3.0N

　

CCA wire

CCA wire(Class 2 and Class 3)

Size [mm]	Conductor dia. [mm]	Conductor resistance [Ω/m] (20℃)	Class 2				Class 3
			Overall diameter [mm]	Min film thickness [mm]		Wire length (*3) [m/1,000gs]	Overall diameter [mm]	Min film thickness [mm]		Wire length (*3) [m/1,000gs]
				Insulation	Bonding			Insulation	Bonding
0.025	- (*1)	52.42 ± 5%	0.0335 ～ 0.0365	0.0285 ～ 0.0315 (*2)	0.0015	421,000	0.0310 ～ 0.0340	0.0290 ～ 0.0310 (*2)	0.001	446,000
0.030	0.030 ± 0.001	36.40 ± 7%	0.039 ～ 0.043	0.002	0.002	299,500	0.037 ～ 0.040	0.002	0.001	314,500
0.035	0.035 ± 0.001	26.75 ± 7%	0.044 ～ 0.048	0.002	0.002	228,500	0.042 ～ 0.045	0.002	0.001	238,500
0.040	0.040 ± 0.001	20.48 ± 7%	0.050 ～ 0.055	0.002	0.002	173,500	0.048 ～ 0.052	0.002	0.001	180,000
0.045	0.045 ± 0.001	16.18 ± 7%	0.055 ～ 0.060	0.002	0.002	136,500	0.0053 ～ 0.057	0.002	0.001	141,000
0.050	0.050 ± 0.002	13.11 ± 7%	0.061 ～ 0.067	0.003	0.003	113,000	0.060 ～ 0.064	0.003	0.0015	116,500
0.055	0.055 ± 0.002	10.83 ± 7%	0.066 ～ 0.073	0.003	0.003	95,500	0.065 ～ 0.069	0.003	0.0015	98,000
0.060	0.060 ± 0.002	9.10 ± 7%	0.071 ～ 0.078	0.003	0.003	81,500	0.070 ～ 0.075	0.003	0.0015	82,500
0.065	0.065 ± 0.002	7.75 ± 7%	0.077 ～ 0.084	0.003	0.003	69,500	0.075 ～ 0.080	0.003	0.0015	71,000
0.070	0.070 ± 0.002	6.69 ± 7%	0.082 ～ 0.090	0.003	0.003	60,000	0.080 ～ 0.085	0.003	0.0015	62,000
0.075	0.075 ± 0.002	4.82 ± 7%	0.088 ～ 0.096	0.003	0.003	52,500	0.085 ～ 0.090	0.003	0.0020	54,500
0.080	0.080 ± 0.002	5.12 ± 7%	0.093 ～ 0.101	0.003	0.003	46,500	0.091 ～ 0.097	0.003	0.002	47,500
0.085	0.085 ± 0.002	4.53 ± 7%	0.098 ～ 0.106	0.003	0.003	42,000	0.096 ～ 0.102	0.003	0.002	42,500
0.090	0.090 ± 0.002	4.04 ± 7%	0.103 ～ 0.111	0.003	0.003	37,500	0.101 ～ 0.107	0.003	0.002	38,000
0.095	0.095 ± 0.002	3.63 ± 7%	0.109 ～ 0.117	0.003	0.003	33,500	0.106 ～ 0.112	0.003	0.002	34,500
0.100	0.100 ± 0.002	3.28 ± 7%	0.114 ～ 0.122	0.003	0.003	30,500	0.111 ～ 0.118	0.003	0.002	31,500

*1　Conductor diameter is controlled by conductor resistance.
*2　Film thickness of insulation is controlled by insurated diameter.
*3　Wire length calculated at target dimentions is mentioned as reference. This is not specified value.
*4　Standard mesurement pressure of micrometer is as follows.
　　Size < 0.030mm：0.7N
　　Size ≥ 0.030mm：3.0N

　

DCCA wire

DCCA wire(Class 2 and Class 3)

Size [mm]	Conductor dia. [mm]	Conductor resistance [Ω/m] (20℃)	Class 2				Class 3
			Overall diameter [mm]	Min film thickness [mm]		Wire length (*1) [m/1,000gs]	Overall diameter [mm]	Min film thickness [mm]		Wire length (*1) [m/1,000gs]
				Insulation	Bonding			Insulation	Bonding
0.030	0.030 ± 0.001	39.03 ± 7%	0.039 ～ 0.043	0.002	0.002	299,500	0.037 ～ 0.040	0.002	0.001	314,500
0.035	0.035 ± 0.001	28.67 ± 7%	0.044 ～ 0.048	0.002	0.002	228,500	0.042 ～ 0.045	0.002	0.001	238,500
0.040	0.040 ± 0.001	21.95 ± 7%	0.050 ～ 0.055	0.002	0.002	173,500	0.048 ～ 0.052	0.002	0.001	180,000
0.045	0.045 ± 0.001	17.34 ± 7%	0.055 ～ 0.060	0.002	0.002	136,500	0.0053 ～ 0.057	0.002	0.001	141,000
0.050	0.050 ± 0.002	14.05 ± 7%	0.061 ～ 0.067	0.003	0.003	113,000	0.060 ～ 0.064	0.003	0.0015	116,500
0.055	0.055 ± 0.002	11.61 ± 7%	0.066 ～ 0.073	0.003	0.003	95,500	0.065 ～ 0.069	0.003	0.0015	98,000
0.060	0.060 ± 0.002	9.76 ± 7%	0.071 ～ 0.078	0.003	0.003	81,500	0.070 ～ 0.075	0.003	0.0015	82,500
0.065	0.065 ± 0.002	8.25 ± 7%	0.077 ～ 0.084	0.003	0.003	69,500	0.075 ～ 0.080	0.003	0.0015	71,000
0.070	0.070 ± 0.002	7.11 ± 7%	0.082 ～ 0.090	0.003	0.003	60,000	0.080 ～ 0.085	0.003	0.0015	62,000
0.075	0.075 ± 0.002	6.19 ± 7%	0.088 ～ 0.096	0.003	0.003	52,500	0.085 ～ 0.090	0.003	0.002	54,500
0.080	0.080 ± 0.002	5.36 ± 7%	0.093 ～ 0.101	0.003	0.003	46,500	0.091 ～ 0.097	0.003	0.002	47,500
0.085	0.085 ± 0.002	4.75 ± 7%	0.098 ～ 0.106	0.003	0.003	42,000	0.096 ～ 0.102	0.003	0.002	42,500
0.090	0.090 ± 0.002	4.23 ± 7%	0.103 ～ 0.111	0.003	0.003	37,500	0.101 ～ 0.107	0.003	0.002	38,000
0.095	0.095 ± 0.002	3.80 ± 7%	0.109 ～ 0.117	0.003	0.003	33,500	0.106 ～ 0.112	0.003	0.002	34,500
0.100	0.100 ± 0.002	3.43 ± 7%	0.114 ～ 0.122	0.003	0.003	30,500	0.111 ～ 0.118	0.003	0.002	31,500

*1　Conductor diameter is controlled by conductor resistance.
*2　Film thickness of insulation is controlled by insurated diameter.
*3　Wire length calculated at target dimentions is mentioned as reference. This is not specified value.
*4　Standard mesurement pressure of micrometer is as follows.
　　Size < 0.030mm：0.7N
　　Size ≥ 0.030mm：3.0N

　

• Products
• Features
• Structure
• Conductor Series
• Types and codes
• Product Name
• Storage Condition
• Specification
• Quality Assurance
• Downloads

Close